注册 登陆
  • kook » 刘佳的技术日志、博客

    应用wvdial进行电信天翼-Huawei-EC620拨号    

  • 2010-07-16 12:35:08 Tags：拨号 电信 应用
  • 应用wvdial进行电信天翼-Huawei-EC1260拨号

    操作系统：
    SLED11 SP1 X86_64

    1：确认已经安装软件包

    wvdial
    rpm -qi wvdial

    如果未安装，请安装zypper in wvdial


    2：查询华为设备并创建配置文件
    执行命令wvdialconf,最终提示你创建

    KOOK-SLED11164:~ # wvdialconf
    Editing `/etc/wvdial.conf'.

    Scanning your serial ports for a modem.

    ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
    ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
    ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
    Modem Port Scan<*1>: S1   S2   S3   S4   S5   S6   S7  
    WvModem<*1>: Cannot get information for serial port.
    ttyUSB0<*1>: ATQ0 V1 E1 -- OK
    ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK
    ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK
    ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
    ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
    ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
    ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD
    ttyUSB0<*1>: Speed 9600: AT -- OK
    ttyUSB0<*1>: Max speed is 9600; that should be safe.
    ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
    WvModem<*1>: Cannot get information for serial port.
    ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
    ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
    ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
    WvModem<*1>: Cannot get information for serial port.
    ttyUSB2<*1>: ATQ0 V1 E1 -- OK
    ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
    ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
    ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
    ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
    ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
    ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD
    ttyUSB2<*1>: Speed 9600: AT -- OK
    ttyUSB2<*1>: Max speed is 9600; that should be safe.
    ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

    Found a modem on /dev/ttyUSB0.
    Modem configuration written to /etc/wvdial.conf.
    ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
    ttyUSB2<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"



    3：确认设备名，替换配置文件
    将下面的配置文件改为你找到的设备名，如上面的/dev/ttyUSB0

    替换掉
    Modem = /dev/ttyUSB0
    即可


    KOOK-SLED11164:~ # cat /etc/wvdial.conf

    [Dialer Defaults]
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Modem Type = Analog Modem
    ISDN = 0
    New PPPD = yes
    Phone = #777
    Modem = /dev/ttyUSB0
    Username = vnet.mobi
    Password = ctnet@mycdma.cn
    Baud = 9600

    [Dialer cdma1x]
    Init1 = ATZ
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Modem Type = Analog Modem
    ISDN = 0
    New PPPD = yes
    Phone = #777
    Modem = /dev/ttyUSB0
    Username = CARD
    Password = CARD
    Baud = 460800


    4: 拨号后，放入后台

    KOOK-SLED11164:~ #  wvdial & disown


    Tags - wvdial , sled11
  • 阅读全文
431 2 下一页